Large Run Printing

Offset printing is the most commonly used large run printing method today. Over 40% of all print jobs are carried out using offset printing.

Offset printing works in a simple manner. It uses three cylinders to transfer the image onto the substrate. The first cylinder is mounted with the printing plate. The image on the printing plate is ‘right’ reading or written with the right side up. The first cylinder is inked and the image is then transferred or offset onto the second cylinder, which is mounted with a rubber blanket. The image on the second cylinder is thus reversed or becomes ‘wrong’ reading. Finally the image is transferred from the blanket cylinder onto the third cylinder or the substrate. The substrate is mounted on the third cylinder also known as the impression cylinder. The image once again is reversed and becomes ‘right’ reading or right side up in the final printed version.

Advantages of Large Run Printing

• High image quality.
• The unit cost goes down as the quantity goes up.
• Quality and cost-effectiveness in high volume jobs. While today’s digital presses are close to the cost/benefit ratio of offset for high quality work, they are not yet able to compete with the volume an offset press can produce.
• Many modern offset presses use computer-to-plate systems as opposed to the older computer-to-film work flows, further increasing quality.

Contact us to find out how you can benefit from large run offset printing at Triboda Printing Company, located in the North Okanagan, Vernon BC.